An anti-crack membrane, also known as an anti-fracture or decoupling membrane, is a barrier placed between the tiles and the substrate. It helps to isolate any movement or cracks in the substrate, preventing them from transferring through to the tiles. This is especially important when tiling on substrates like timber floors.

For grouting worktops, standard wall and floor grout isn't suitable. Only epoxy grout, such as Larsen's Epoxy Grout, should be used for worktop grouting.

To prevent grout from staining over time, it's best to seal it after installation. A product like LTP Grout & Tile Protector can help stop grout from absorbing dirt and grime, even though most grout is water-resistant.

You can remove dried grout from your tiles using LTP Grout Stain Remover. This product can eliminate grout stains, cement residue, limescale, and efflorescence. However, ensure it is suitable for your specific tile type before use.

For natural stone tiles, it is essential to use a pH-neutral cleaner to avoid damaging the stone. LTP Waxwash is an ideal pH-neutral cleaner for natural stone and other tile types.

To remove old sealers from natural stone tiles, use a high-performance stripper like LTP Solvex. It can remove sealers from Travertine, Slate, Terracotta, Quarry, Ceramic, and Porcelain tiles.

Before tiling a shower enclosure, it is important to waterproof the area. Larsen’s Waterproof Tanking Kit is an excellent solution, as it provides everything needed to waterproof a 4m² area, such as a shower enclosure.

The maximum depth depends on the type of self-levelling compound. For example, Larsen’s SLC 1550 Fibre Flex self-levelling compound has a maximum depth of 50mm, which is greater than many standard compounds.

To choose the correct tile trim size, pick one size up from the tile thickness. For instance, if your tile is 10mm thick, use a 12.5mm tile trim to allow for the adhesive layer.

In most cases, painted surfaces are not suitable for tiling. Emulsion paint, lime-wash, distemper, and similar finishes should be removed because they often have poor adhesion to the substrate.

Yes, natural stone tiles need sealing before installation to protect them from dirt, adhesive, and grout. Periodic sealing after installation is also necessary to preserve the stone's beauty.

When cutting porcelain, ceramic, or natural stone tiles, consider both the tile type and the cut you need. For straight cuts, a rail cutter might be best, while intricate cuts may require a wet wheel cutter.

Fitting mosaics can be challenging due to their flexibility. To make the process easier, use a Mosaic Mesh Backing Sheet to add rigidity to the mosaic sheet, preventing it from flopping during installation.